- Código RS:
- 244-2898P
- Referência do fabricante:
- TLE94613ESXUMA1
- Fabricante:
- Infineon
Temporariamente fora de stock. O produto será entregue assim que estiver disponível.
Preço Unidade (fornecido em bobina) As quantidades inferiores a 150 unidades são fornecidas em uma tira contínua
2,055 €
Unidades | Por unidade |
---|---|
20 - 48 | 2,055 € |
50 - 98 | 1,93 € |
100 - 198 | 1,785 € |
200 + | 1,665 € |
- Código RS:
- 244-2898P
- Referência do fabricante:
- TLE94613ESXUMA1
- Fabricante:
- Infineon
Documentação Técnica
Legislação e Conformidade
Detalhes do produto
The Infineon TLE94613ESXUMA1 device is designed for various CAN automotive applications as main supply for the microcontroller and as interface for a CAN bus network including the CAN Partial Networking feature. To support these applications, the System Basis Chip (SBC) provides the main functions, such as a 5 V lowdropout voltage regulator (LDO) for e.g. a microcontroller supply, another 5 V low-dropout voltage regulator with off-board protection for e.g. sensor supply, a HS-CAN transceiver supporting CAN FD and CAN Partial Networking (incl. FD tolerant mode) for data transmission, a high-voltage GPIO with embedded protective functions and a 16-bit Serial Peripheral Interface (SPI) to control and monitor the device.
Fully compliant to Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications Revision 1.3, 2012-05-04
Charge pump-Output for N-channel MOSFET reverse-polarity protection with integrated spread spectrum modulation feature for optimum EMC performance
Universal High-Voltage Wake Input for voltage level monitoring and wake detection
General Purpose High-Voltage In- and Output (GPIO) configurable as Fail Output, Wake Input, Low-Side switch or High-Side switch
HIgh-Voltage Measurement Function as alternate pin assignment
Fail Outputs for Fail-Safe signalization
Configurable wake-up sources
Reset Output & Interrupt Output
Charge pump-Output for N-channel MOSFET reverse-polarity protection with integrated spread spectrum modulation feature for optimum EMC performance
Universal High-Voltage Wake Input for voltage level monitoring and wake detection
General Purpose High-Voltage In- and Output (GPIO) configurable as Fail Output, Wake Input, Low-Side switch or High-Side switch
HIgh-Voltage Measurement Function as alternate pin assignment
Fail Outputs for Fail-Safe signalization
Configurable wake-up sources
Reset Output & Interrupt Output
Especificações
Atributo | Valor |
---|---|
Aplicación | Automoción |
Tipo de Encapsulado | TSDSO-24 |