Caja de conexiones CE-TEK CEP237555PAU, Poliéster, Negro, 75mm, 55mm, 230mm, 75 x 230 x 55mm, IP66, 8 x M20
- Código RS:
- 184-0465
- Referência do fabricante:
- CEP237555PAU
- Fabricante:
- CE-TEK
Preço unitário**
175,86 €
5 Disponível para entrega em 4 dia(s) útil(eis).*
* As datas de entrega podem variar em função da quantidade escolhida e do endereço de entrega.
Entrega GRATUITA para encomendas superiores a 80,00 €
Unidades | Por unidade |
|---|---|
| 1 + | 175,86 € |
**preço indicativo
- Código RS:
- 184-0465
- Referência do fabricante:
- CEP237555PAU
- Fabricante:
- CE-TEK
Estado RoHS: Não aplicável
- COO (País de Origem):
- GB
Cajas de conexiones de componentes CE-TEK "CEP" GRP sin certificación, ATEX IECex, vacía, versión en U
Presentamos una nueva serie de cajas de conexiones de componentes sin certificación ATEX IECex vacía de versión en U de CE-TEK. Todas las cajas de la gama se suministran pre-mecanizadas con aberturas de entrada de casquillo de cable roscadas M20/ M25 (cada una equipada con tapones de obturación con calificación EX) y se suministran completas con una placa de continuidad de conexión a tierra interna perforada y un tornillo de conexión a tierra interno/externo. Estas cajas de conexiones vacías incorporan ubicaciones de fijación interna para la instalación de una placa de montaje o una longitud de carril DIN y están diseñadas para integrarse posteriormente con componentes con certificación EX adecuados o bloques terminales de montaje en carril DIN con certificación EX.
NOTA IMPORTANTE: el componente sin certificación ATEX IECex versión en U vacío que abarca esta gama lleva el sufijo "U" que indica que estos productos de carcasa vacía se han evaluado para su uso como "componente" y, por tanto, solo deben formar parte de un "ensamblaje" de equipo de área peligrosa o "sistema" de protección que, a su vez, estará sujeto a una evaluación posterior (certificación propia o de terceros) por derecho propio.
NB; This partial “Component” certification may be used as the basis for subsequent certification of an equipment assembly or protective system.
CE-TEK Empty GRP Junction Boxes are intended for use by OEM Companies and/or qualified Hazardous Area Electrical Installers and have been designed to provide a ready to integrate, partially certified EX housing.
Features and Benefits
• Manufactured from Black (anti-static graphite loaded) polyester (GRP)
• Factory machined with M20 / M25 Threaded cable entry holes
• Supplied with an Integrated & punched earth continuity plate
• Fitted with an Internal and external M6 earth stud
• Provide IP 66 ingress protection
• Comply with Ex e & Ex tb requirements of EN 60079-0:2012 (inc. A11:2013), EN 60079-7: 2007
and EN 60079-31:2014 as an enclosure component.
• Have a certified service temperature range of between -50oC to +100oC
• ATEX certification, certificate no:- ExVeritas 18 ATEX 0320U
CEP Black Polyester (GRP) ATEX EX”e” Certified Junction Box Options
RS stock no: 184-0462
L.110 x W.75 x H.75 mm
4 x M20 cable entries
4 x certified stopping plugs
RS stock no: 184-0463
L.160 x W.75 x H. 75 mm
6 x M20 cable entries
6 x certified stopping plugs
RS stock no: 184-0464
L.190 x W.75 x H.75 mm
6 x M20 cable entries
6 x certified stopping plugs
RS stock no: 184-0465
L.230 x W.75 x H.55 mm
6 x M20 + 2 x M25 cable entries
8 x certified stopping plugs
RS stock no: 184-0466
L.260 x W.160 x H.90 mm
6 x M20 + 2 x M25 cable entries
8 x certified stopping plugs
Typical Applications
CE-TEK Hazardous Area Junctions boxes are specifically designed for use by Industries such as those of the Oil & Gas, Petro-Chem, Milling, Pharmaceutical , Waste Water, and Fuel Distribution sectors, where the need exists to install electrical, data and communication equipment within environments where highly combustible gases, liquids or dust are commonly, or indeed constantly present.
More generally, Junctions Boxes are primarily used in building construction* and are designed to provide protection to wiring circuits and electrical connections for easy access. Boxes are usually made from metal or heavy-duty plastic and in most situations can be used both indoor and outdoor due to their water and impact resistance. * but also, as part of the electrical wiring of plant, machinery, equipment or vehicles intended to be used in Hazardous Areas
Typically wiring applications:
• Initial building / facility electrical installations for Power, Lighting, HVAC, Control etc
• As an integral part of OEM equipment, machinery or plant wiring
• Connecting additional sockets to circuits
• Adding lighting points
• Extending electrical circuits
• Electricity circuit repairs, upgrades and modifications
FAQ's
Does the box come with terminals
No, EX Certified terminal blocks are Not included in these “Empty” junction boxes. However internal fixing locations and screws for either a Mounting plate or a suitable cut length of DIN rail are provided
What’s included in the box?
• Junction box with cover
• internal DIN rail or Mounting plate fixing locations and screws
• Pre machined threaded cable gland holes (fitted with EX certified blanking plugs)
• a punched internal earth continuity plate
• an M6 internal/external earth stud
• ATEX “Component” certification label – fitted internally*
(*to avoid being mistaken as an EX certified equipment “assembly” or protective “system” certified product.)
Atributo | Valor |
|---|---|
| Dimensiones Long. x Anch. x Alt. | 75 x 230 x 55mm |
| Material | Poliéster |
| Longitud | 75mm |
| Anchura | 55mm |
| Altura | 230mm |
| Índice de Protección IP | IP66 |
| Color | Negro |
| Certificación para atmósferas explosivas ATEX | ATEX |
| Entrada de cable | 8 x M20 |
| Series | CEP |