- Código RS:
- 178-5028
- Fabricante:
- RS PRO
3 Disponível para entrega em 24/48 horas
Adicionado
Preço unitário
120,55 €
Unidades | Por unidade |
1 - 4 | 120,55 € |
5 - 9 | 115,73 € |
10 + | 110,91 € |
- Código RS:
- 178-5028
- Fabricante:
- RS PRO
Documentação Técnica
Legislação e Conformidade
- COO (País de Origem):
- GB
Detalhes do produto
An 11 pin plug in DPCO true delay off timer. The units are supply voltage selectable via the connection to different pins. Two selector switches are provided to select four different time ranges from 0.1 sec to 30 mins, fine time selection on a selected range is then achieved via a percentage potentiometer. Two green supply on LEDs are featured to indicate supply healthy. On removal of the supply voltage and therefore the commencing of timing the LEDs on this timer will extinguish. All pin details and the function information is clearly marked on the sides of the housing. The relay energises immediately the supply voltage is applied to the supply pins 10 to 2, 5 or 6 depending on the required supply voltage. When the supply voltage is removed the relay is held energised by a charged capacitor, the removal of the supply voltage instigates the timing period. After the timing period has elapsed the relay will de-energise. A break in the supply of less than the set time will therefore be ignored. Since the relay is held energised after the removal of the supply by a charged capacitor it is necessary that the initial connection of the supply voltage must be at least 500mSec to facilitate the full charging of the capacitor.
Especificações
Atributo | Valor |
---|---|
Tensión de Alimentación | 24 V ac/dc, 110 V ac, 230V ac |
Tipo de Montaje | Enchufable |
Funciones de Temporización | Retardo de apagado |
Rango de Tiempo | 0.1 s → 30min |
Número de Funciones de Temporización | Único |
Configuración de los Contactos | DPDT |
Incremento de Tiempo | Minutos, Segundos |
Corriente Máxima | 8A |
Tensión Máxima | 230V |
Tipo de Terminal | Conector de 11 contactos |
Configuración del Interruptor | DPDT |
Fuente de Alimentación | Externo |
Anchura | 24mm |
Tensión Mínima | 24V ac/dc |
Profundidad | 74mm |
Temperatura de Funcionamiento Máxima | +65°C |
Longitud | 48mm |
Retardo | 100ms |
Temperatura de Funcionamiento Mínima | -20°C |