- Código RS:
- 610-8762
- Referência do fabricante:
- S8VM15024CD
- Fabricante:
- Omron
Produto Descatalogado
- Código RS:
- 610-8762
- Referência do fabricante:
- S8VM15024CD
- Fabricante:
- Omron
Documentação Técnica
Legislação e Conformidade
- COO (País de Origem):
- CN
Detalhes do produto
Fuentes de alimentación de desconexión serie S8VM 15 → 150W
Fuente de alimentación de carril DIN, disponible en una carcasa compacta de 15 → 150 W a 5, 12 y 24 V dc.
Activa una alarma si se detecta una anomalía observando el comportamiento de salida de cc, lo que permite determinar Rapid el fallo.
Indica anomalías en el lado de carga (alarma de subtensión).
Indica un fallo en la fuente de alimentación de entrada (alarma de subtensión).
Activa una alarma si se detecta una anomalía observando el comportamiento de salida de cc, lo que permite determinar Rapid el fallo.
Indica anomalías en el lado de carga (alarma de subtensión).
Indica un fallo en la fuente de alimentación de entrada (alarma de subtensión).
Part Number S8VM- 15024CD
The S8VM Switch mode Din Rail mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM- 15024CD has a power rating of 150 W and an output voltage of 24 V dc plus a rated input voltage of 100 V ac to 240 V ac. This Standard model incudes green output indicators plus is natural air cooling.
Features and Benefits.
Covered type power supply
Screw terminal
Design stops screws from falling out of the terminal block
Switch mode
DIN Rail Mounted
Green output indicators
Natural air cooling
Power rating 150 W
Output voltage 24 V dc
Input voltage 100 V ac to 240 V ac
Rated output current 6.5 A
Harmonic current emissions
Efficiency 83% min.
Frequency 50/60 Hz
Remote sensing function
Electric shock finger protection
RoHS compliant including Lead Free construction
What is a DIN Rail Mounted Power Supply?
A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.
What is A Switch Mode Power Supply?
Switch mode power supplies are a general purpose power supply include a switching regulator converting AC mains power to a lower voltage DC. A Switch mode power supply is efficient limiting any wasted energy.
Safety and Storage.
Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge.
Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
Shock resistance 150 m/s **2 in each 6 directions 3 times.
Estándares
UL508/60950-1/1604, CSA C22.2 No. 14/No. 60950-1/No. 213, EN50178, EN60950-1. SELVE, Harmonic current emissions conform to EN61000-3-2.
Especificações
Atributo | Valor |
---|---|
Type | Modo conmutado |
Tensión de salida | 24V dc |
Corriente de Salida | 6.5A |
Tensión de entrada ac o dc | ac |
Tensión de salida ac o dc | dc |
Tensión de entrada | 85 → 264V ac |
Potencia nominal | 150W |
Fase eléctrica | 1 |
Número de salidas | 1 |
Altura | 82.5mm |
Ancho | 49.1mm |
Profundidad | 178.1mm |
Serie | S8VM |
Rizado y ruido | ±0.75% |
Temperatura máxima | +50°C |
Regulación de carga | ±0.8% |
MTBF | 135000h |
Efficiency | 83% |
Tipo de montaje | Montaje en carril DIN |