- Código RS:
- 185-0684
- Referência do fabricante:
- BR25H160FJ-2CE2
- Fabricante:
- ROHM
- Código RS:
- 185-0684
- Referência do fabricante:
- BR25H160FJ-2CE2
- Fabricante:
- ROHM
Documentação Técnica
Legislação e Conformidade
- COO (País de Origem):
- JP
Detalhes do produto
BR25H160-2C is a serial EEPROM of SPI BUS interface method.
High Speed Clock Action up to 20MHz (Max)
Wait Function by HOLDB Terminal
Part or Whole of Memory Arrays Settable as Read only Memory Area by Program
1.6V to 5.5V Single Power Source Operation Most Suitable for Battery Use.
Up to 64 Bytes in Page Write Mode.
For SPI Bus Interface (CPOL, CPHA) = (0, 0), (1, 1)
Self-timed Programming Cycle
Low Current Consumption
At Write Action (5V) : 0.5mA (Typ)
At Read Action (5V) : 2.0mA (Typ)
At Standby Action (5V) : 0.1μA (Typ)
Address Auto Increment Function at Read Action
Prevention of Write Mistake
Write Prohibition at Power On
Write Prohibition by Command Code (WRDI)
Write Prohibition by WPB Pin
Write Prohibition Block Setting by Status Registers (BP1, BP0)
Prevention of Write Mistake at Low Voltage
More than 100 years Data Retention.
More than 1 Million Write Cycles.
Bit Format 16Kx8
Initial Delivery Data
Memory Array: FFh
Status Register: WPEN, BP1, BP0 : 0
Wait Function by HOLDB Terminal
Part or Whole of Memory Arrays Settable as Read only Memory Area by Program
1.6V to 5.5V Single Power Source Operation Most Suitable for Battery Use.
Up to 64 Bytes in Page Write Mode.
For SPI Bus Interface (CPOL, CPHA) = (0, 0), (1, 1)
Self-timed Programming Cycle
Low Current Consumption
At Write Action (5V) : 0.5mA (Typ)
At Read Action (5V) : 2.0mA (Typ)
At Standby Action (5V) : 0.1μA (Typ)
Address Auto Increment Function at Read Action
Prevention of Write Mistake
Write Prohibition at Power On
Write Prohibition by Command Code (WRDI)
Write Prohibition by WPB Pin
Write Prohibition Block Setting by Status Registers (BP1, BP0)
Prevention of Write Mistake at Low Voltage
More than 100 years Data Retention.
More than 1 Million Write Cycles.
Bit Format 16Kx8
Initial Delivery Data
Memory Array: FFh
Status Register: WPEN, BP1, BP0 : 0
Especificações
Atributo | Valor |
---|---|
Tamaño de la Memoria | 16kbit |
Tipo de Interfaz | SPI |
Tipo de Encapsulado | SOP-J |
Tipo de Montaje | Montaje superficial |
Conteo de Pines | 8 |
Organización | 2K x 8 bit |
Tensión de Alimentación de Funcionamiento Mínima | 2.5 V |
Tensión de Alimentación Máxima de Funcionamiento | 5.5 V |
Tensión de Programación | 2.5 → 5.5V |
Número de Bits de Palabra | 8bit |
Dimensiones | 4.9 x 3.9 x 1.37mm |
Número de Palabras | 2K |
Data Retention | 100año |
Estándar de automoción | AEC-Q100 |
Temperatura de Funcionamiento Mínima | -40 °C |
Temperatura Máxima de Funcionamiento | +125 °C |