CI de controlador de motor paso a paso, M puente BD63730EFV-E2, HTSSOP 3 (Continuous) A, 3.5 (Peak) A 36 V Motor paso a
- Código RS:
- 185-0311
- Referência do fabricante:
- BD63730EFV-E2
- Fabricante:
- ROHM
Produto Descatalogado
- Código RS:
- 185-0311
- Referência do fabricante:
- BD63730EFV-E2
- Fabricante:
- ROHM
Documentação Técnica
Legislação e Conformidade
Detalhes do produto
Rated output current of 3.0A DC
Low ON-Resistance DMOS output
CLK-IN drive mode
PARALLEL-IN drive mode
PWM constant current control (other oscillation)
Built-in spike noise cancel function (external noise filter is unnecessary)
Full-step, half-step (two types), and quarter-step functionality
Dynamic excitation mode switch
Current decay mode switch (linearly variable FAST/SLOW DECAY ratio)
Normal rotation & reverse rotation switching function
Power save function
Built-in logic input pull-down resistor
Power-ON reset function
Thermal shutdown circuit (TSD)
Over-current protection circuit (OCP)
Under voltage lock out circuit (UVLO)
Over voltage lock out circuit (OVLO)
Ghost Supply Prevention (protects against malfunction when power supply is disconnected)
Electrostatic discharge: 4kV (HBM specification)
Adjacent pins short protection
Micro miniature, ultra-thin and high heat-radiation (exposed metal type) package
Low ON-Resistance DMOS output
CLK-IN drive mode
PARALLEL-IN drive mode
PWM constant current control (other oscillation)
Built-in spike noise cancel function (external noise filter is unnecessary)
Full-step, half-step (two types), and quarter-step functionality
Dynamic excitation mode switch
Current decay mode switch (linearly variable FAST/SLOW DECAY ratio)
Normal rotation & reverse rotation switching function
Power save function
Built-in logic input pull-down resistor
Power-ON reset function
Thermal shutdown circuit (TSD)
Over-current protection circuit (OCP)
Under voltage lock out circuit (UVLO)
Over voltage lock out circuit (OVLO)
Ghost Supply Prevention (protects against malfunction when power supply is disconnected)
Electrostatic discharge: 4kV (HBM specification)
Adjacent pins short protection
Micro miniature, ultra-thin and high heat-radiation (exposed metal type) package
Especificações
Atributo | Valor |
---|---|
Tipo motriz | Motor paso a paso |
Configuración | M puente |
Configuración de Salida | DMOS |
Corriente de Salida Máxima | 3 (Continuous) A, 3.5 (Peak) A |
Tensión de Alimentación Máxima | 36 V |
Tipo de Montaje | Montaje superficial |
Tipo de Encapsulado | HTSSOP |
Conteo de Pines | 54 |
Tensión de Alimentación Máxima de Funcionamiento | 28 V |
Tensión de Alimentación de Funcionamiento Mínima | 19 V |
Longitud del Producto | 18.5mm |
Temperatura de Funcionamiento Mínima | -25 °C |
Temperatura Máxima de Funcionamiento | +85 °C |
Dimensiones | 18.5 x 7.5 x 0.85mm |
Altura del Producto | 0.85mm |
Ancho | 7.5mm |
Altura | 0.85mm |
Anchura del Producto | 7.5mm |
Longitud | 18.5mm |